NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch - Manual (Page 12)

Smart Managed Pro Switches MS510TX and MS510TXPP
Get Started User Manual 12
After discovery, you can configure the switch using the local browser–based management
interface, or the SCC program for very basic setup. For more information, see Access the
Switch on page 14 and the SCC user manual, which you can download from
downloadcenter.netgear.com .
• Local browser–based management interface . This manual describes how to use the
local browser–based management interface, in this manual referred to as the local
browser interface, to manage and monitor the switch. The local browser interface lets you
configure basic and advanced features. For more information, see
Access the Switch on
page 14 .
• Simple Network Management Protocol (SNMP) . You can manage through switch
through SNMP. For more information, see Configure SNMP on page 59 .
Web Browser Requirements and
Supported Browsers
To access the switch by using a web browser, the browser must meet the following software
requirements:
• HTML version 4.0, or later
• HTTP version 1.1, or later
• Java Runtime Environment 1.6 or later
The following browsers were tested and support the local browser interface. Later browser
versions might function fine but were not tested. The following web browsers are supported:
• Microsoft Internet Explorer (IE) versions 9–11
• Microsoft Edge 25
• Mozilla Firefox versions 53–54
• Chrome versions 58–59
• Safari on MAC OS: 10.1 (MAC OS Yosemite Version 10.10.5)