NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 276
Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security
User Manual
276
Note:
An implicit
deny all
rule is included at the end of an ACL list. This
means that if an ACL is applied to a packet, and if none of the explicit
rules match, then the final implicit
deny all
rule applies and the packet
is dropped.
Add a Rule for a Basic IP ACL
To add a rule for a basic IP ACL:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.
The System Information page displays.
5.
Select
Security > ACL > Advanced > IP Rules
.
The IP Rules table displays. The page also shows the Basic ACL Rule Table section.
If one or more rules exist for the ACL, the rules display in the Basic ACL Rule Table.
6.
From the
ACL ID
menu, select the IP ACL for which you want to add a rule.
For basic IP ACLs, this must be an ID in the range from 1 to 99.
7.
Click the
Add
button.
8.
Specify the following match criteria for the rule: