NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch - Manual (Page 271)

Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security User Manual 271
If you do not know the IP address of the switch, see Access the Switch on page 14 .
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password .
The System Information page displays.
5. Select Security > ACL > Basic > MAC Rules .
The MAC Rules page displays.
6. Select the check box for the rule.
7. Click the Delete button.
The rule is removed.
Configure MAC Bindings
When an ACL is bound to an interface, all the rules that are defined are applied to the
selected interface. Use the MAC Binding Configuration page to assign MAC ACL lists to ACL
priorities and interfaces.
To configure MAC bindings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 14 .
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password .
The System Information page displays.
5. Select Security > ACL > Basic > MAC Binding Configuration .