NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 279
Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security
User Manual
279
Note:
An implicit
deny all
rule is included at the end of an ACL list. This
means that if an ACL is applied to a packet and if none of the explicit
rules match, then the final implicit
deny all
rule applies and the packet
is dropped.
Add a Rule for an Extended IP ACL
To add a rule for an extended IP ACL:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.
The System Information page displays.
5.
Select
Security > ACL > Advanced > IP Extended Rules
.
If one or more rules exist for the ACL, the rules display in the Extended ACL Rule Table.
6.
From the
ACL ID/Name
menu, select the IP ACL for which you want to add a rule.
For extended IP ACLs, this must be an ID in the range from 101 to 199.
7.
Click the
Add
button.