beautypg.com

NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual

Page 136

background image

Smart Managed Pro Switches MS510TX and MS510TXPP

Configure Switching

User Manual

136

You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.

2.

Launch a web browser.

3.

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see

Access the Switch on page

14

.

The login window opens.

4.

Enter the switch’s password in the

Password

field.

The default password is

password

.

The System Information page displays.

5.

Select

Switching

> Multicast > IGMP Snooping > IGMP Snooping Configuration

.

The IGMP Snooping Configuration page displays. The page also shows the VLAN IDs
Enabled For IGMP Snooping section and the VLAN IDs Enabled For IGMP Snooping
Querier section.

6.

Next to IGMP Snooping Status, select whether IGMP snooping is enabled on the switch:

Enable

. The switch snoops all IGMP packets it receives to determine which segments

should receive packets directed to the group address.

Disable

. The switch does not snoop IGMP packets. This is the default setting.

7.

Next to Block Unknown Multicast Addresses, select whether unknown multicast addresses

are blocked:

Enable

. Packets with unknown multicast MAC addresses in the destination field are

dropped.

Disable

. Packets with unknown destination multicast MAC addresses are flooded to

all interfaces in VLAN. This is the default setting.

8.

Click the

Apply

button.

Your settings are saved.

9.

To refresh the page with the latest information about the switch, click the

Refresh

button.

The following table displays information about the global IGMP snooping status.

Table 36. IGMP snooping and IGMP snooping querier VLAN information

Field

Description

VLAN IDs Enabled For IGMP
Snooping

The VLANs on which IGMP snooping is enabled. For more information, see

Configure IGMP Snooping for VLANs on page

138

.

VLAN IDs Enabled For IGMP
Snooping Querier

The VLANs on which IGMP snooping querier is enabled. For more information,
see

Configure MLD Snooping Querier VLAN Settings on page

148

.