Configure – NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 222
Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security
User Manual
222
Configure a RADIUS Authentication Server on the Switch
Use the RADIUS Server Configuration page to view and configure various settings for a
RADIUS server configured on the switch.
Add a Primary or Secondary RADIUS Authentication Server to the Switch
To add a primary or secondary RADIUS authentication server to the switch:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.
The System Information page displays.
5.
Select
Security > Management Security > RADIUS > Server Configuration
.
The Server Configuration page displays.
6.
In the
Server Address
field, specify the IP address of the RADIUS server.
7.
In the
Authentication Port
field, specify the UDP port number the server uses to verify the
RADIUS server authentication.
The valid range is from 1 to 65535. The default value is 1812.
8.
From the
Secret Configured
menu, select
Yes
.
You must select
Yes
before you can configure the RADIUS secret. After you add the
RADIUS server, this field indicates whether the shared secret for this server was
configured.
9.
In the
Secret
field, type the shared secret text string used for authenticating and encrypting
all RADIUS communications between the switch and the RADIUS server.
This secret must match the RADIUS encryption.
10.
From the
Active
menu, select
Primary
for a primary authentication server or
Secondary
for
a secondary authentication server.
11.
Click the
Add
button.
The server is added to the switch.