NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch - Manual (Page 309)

Smart Managed Pro Switches MS510TX and MS510TXPP
Monitor the System User Manual 309
If you do not know the IP address of the switch, see Access the Switch on page 14 .
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password .
The System Information page displays.
5. Select Monitoring > Logs > Server Log .
The Server Configuration page displays.
6. Select the check box that is associated with the host.
7. Click the Delete button.
The host is removed.
View the Trap Logs
Use the Trap Logs page to view information about the SNMP traps generated on the switch.
The information can be retrieved as a file.
The page also displays information about the traps that were sent.
View the trap logs and clear the counters:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 14 .
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password .
The System Information page displays.
5. Select Monitoring > Logs > Trap Logs .
The Trap Logs page displays.
The page shows the number of traps that occurred since the switch last rebooted.
6. To refresh the page with the latest information about the switch, click the Refresh button.