NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch - Manual (Page 183)

Smart Managed Pro Switches MS510TX and MS510TXPP
Configure Routing User Manual 183
Remove an IPv6 Global Address From an IPv6 VLAN
IPv6 link-local addresses are created automatically when you enable the IPv6 admin mode
on an VLAN interface, and they cannot be removed or edited. However, you can manually
remove one or more IPv6 global addresses from a VLAN.
To remove one or more IPv6 global addresses from an IPv6 VLAN:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 14 .
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password .
The System Information page displays.
5. Select Routing  > IPv6 > Advanced > IPv6 Addresses .
The IPv6 Interface Selection page displays. The page also shows the IPv6 Interface
Configuration table.
6. From the Interface menu, select the VLAN.
7. Select the check boxes for the IPv6 global addresses.
You cannot select any check boxes for IPv6 link-local addresses.
8. Click the Delete button.
The IPv6 global addresses are removed from the IPv6 VLAN.
Add an IPv6 Prefix for Advertisement on an IPv6 VLAN
When you add an IPv6 prefix for advertisement on an IPv6 VLAN, the prefix is advertised on
all interfaces that are members of the VLAN.
To add an IPv6 prefix for advertisement on an IPv6 VLAN:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.