Configure management access, Configure http settings – NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 232
Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security
User Manual
232
8.
From the menu in the 2 column, select the authentication method, if any, that must be used
second in the selected authentication login list.
This is the method that is used if the first method times out. If you select a method that
does not time out as the second method, the third method is not tried.
9.
From the menu in the 3 column, select the authentication method, if any, that must be used
third in the selected authentication login list.
10.
From the menu in the 4 column, select the method, if any, that must be used fourth in the
selected authentication login list.
This is the method that is used if all previous methods time out.
11.
Click the
Apply
button.
Your settings are saved.
Configure Management Access
You can configure HTTP and secure HTTP access to the switch management interface. You
can also configure access control profiles and access rules.
From the
Security > Management Security > Access
menu, you can access the pages that
are described in the following sections:
•
Configure HTTP Settings on page
•
Configure HTTPS Settings on page
•
Manage the Certificate on page
•
Configure Access Control on page
Configure HTTP Settings
Use the HTTP Configuration page to configure the HTTP settings on the system.
To configure the HTTP server settings:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
Password
field.