Configure garp switch settings – NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 109
Smart Managed Pro Switches MS510TX and MS510TXPP
Configure Switching
User Manual
109
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.
The System Information page displays.
5.
Select
Switching > VLAN > Advanced > Protocol Based VLAN Group Membership
.
The Protocol Based VLAN Group Membership page displays.
6.
In the
Group ID
menu, select the group ID.
7.
In the
VLAN ID
menu, select the VLAN ID.
8.
In the Ports table, click the port once to add it to the VLAN for the group or twice to remove
it from the VLAN for the group.
By default, the selection is blank, which means that the port is excluded from the VLAN
for the group.
9.
In the LAG table, click the LAG once to add it to the VLAN for the group or twice to remove
it from the VLAN for the group.
By default, the selection is blank, which means that the LAG is excluded from the VLAN
for the group.
10.
Click the
Apply
button.
Your settings are saved.
Configure GARP Switch Settings
The Generic Attribute Registration Protocol (GARP) is used to exchange information
between GARP participants to register and deregister attribute values within a bridged LAN.
When a GARP participant declares or withdraws a given attribute, the attribute value is
recorded with the applicant state machine for that attribute, for the port from which the
declaration or withdrawal was made.
•
Registration occurs only on ports that receive the GARP PDU containing a declaration or
withdrawal.
•
Deregistration occurs only if all GARP participants connected to the same LAN segment
as the port withdraw the declaration.
GARP is part of the IEEE 802.1p extension to its 802.1D (spanning tree) specification. It
includes the following:
•
GARP Information Declaration (GID)
. The part of GARP that generates data.
•
GARP Information Propagation (GIP)
. The part of GARP that distributes data.