NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch - Manual (Page 213)

Smart Managed Pro Switches MS510TX and MS510TXPP
Configure Quality of Service User Manual 213
Assign Another Class to an Existing DiffServ Policy
To assign another class to an existing DiffServ policy:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 14 .
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password .
The System Information page displays.
5. Select QoS > DiffServ > Advanced > Policy Configuration .
The Policy Configuration page displays.
6. Select the check box for the policy name.
7. From the Member Class menu, select another class.
8. Click the Apply button.
Your settings are saved.
Delete a DiffServ Policy
To delete a DiffServ policy:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 14 .
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password .
The System Information page displays.
5. Select QoS > DiffServ > Advanced > Policy Configuration .
The Policy Configuration page displays.