View, search, and manage the mac address table – NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 153
Smart Managed Pro Switches MS510TX and MS510TXPP
Configure Switching
User Manual
153
The Multicast Forward All page displays.
6.
From the
VLAN ID
menu, select the VLAN ID for the VLAN in which the multicast group is
located.
If a name is associated with the VLAN, the name displays in the VLAN Name field.
7.
Select which type of interfaces display onscreen:
•
To display physical ports only, click the
PORTS
link.
•
To display LAGs only, click the
LAGS
link.
•
To display both physical ports and LAGs, click the
All
link.
8.
Select one or more interfaces by taking one of the following actions:
•
To configure a single interface, select the check box associated with the interface, or
type the interface number in the
Go To Interface
field and click the
Go
button.
•
To configure multiple interfaces with the same settings, select the check box
associated with each interface.
•
To configure all interfaces with the same settings, select the check box in the heading
row.
9.
From the
Interface Status
menu, select one of the following options:
•
Static
. The interface receives all multicast traffic on the VLAN and forwards the traffic.
•
Forbidden
. The interface cannot receive any multicast traffic on the VLAN, even if
the IGMP or MLD snooping process designated the interface as a member of a
multicast group.
•
Excluded
. The Multicast Forward All option is not enabled on the interface, that is,
the interface does not forward all multicast traffic on the VLAN. This is the default
state.
10.
Click the
Apply
button.
Your settings are saved.
View, Search, and Manage the MAC
Address Table
The Address Table (or MAC Address Table) contains information about unicast MAC address
entries for which the switch saved forwarding or filtering information. The transparent bridging
function uses this information in determining how to propagate a received frame. Use the
search function of the Address Table page to display information about the entries in the
table.
You can also add static entries to the Address Table and specify the period after which
dynamic MAC address entries that are not updated are automatically removed from the
Address Table.