NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch - Manual (Page 289)

Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security User Manual 289
6. From the ACL ID menu, select an existing IP ACL for which you want to add an IP ACL
interface binding.
The fixed selection from the Direction menu is Inbound , which means that ACL rules are
applied to traffic entering the interface.
7. In the Sequence Number field, optionally specify a number to indicate the order of the
access list relative to other access lists already assigned to this interface and direction.
A low number indicates high precedence order. If a sequence number is already in use
for this interface and direction, the specified access list replaces the currently attached
access list using that sequence number. If you do not specify the sequence number
(meaning that the value is 0), a sequence number that is one number greater than the
highest sequence number currently in use for this interface and direction is used. The
valid range is 1–2147483647.
8. To add the selected ACL to a port or LAG, in the Ports table or LAG table, click the port or
LAG so that a check mark displays.
You can add the ACL to several ports and LAGs.
The Ports and LAG tables display the available and valid interfaces for ACL bindings. All
nonrouting physical interfaces and interfaces participating in LAGs are listed.
9. Click the Apply button.
Your settings are saved.