beautypg.com

NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual

Page 111

background image

Smart Managed Pro Switches MS510TX and MS510TXPP

Configure Switching

User Manual

111

If you do not know the IP address of the switch, see

Access the Switch on page

14

.

The login window opens.

4.

Enter the switch’s password in the

Password

field.

The default password is

password

.

The System Information page displays.

5.

Select

Switching

> VLAN > Advanced > GARP Port Configuration

.

The GARP Port Configuration page displays.

6.

Select which type of interfaces display onscreen:

To display physical ports only, click the

PORTS

link.

To display LAGs only, click the

LAGS

link.

To display both physical ports and LAGs, click the

All

link.

7.

Select one or more interfaces by taking one of the following actions:

To configure a single interface, select the check box associated with the interface, or
type the interface number in the

Go To Interface

field and click the

Go

button.

To configure multiple interfaces with the same settings, select the check box
associated with each interface.

To configure all interfaces with the same settings, select the check box in the heading
row.

8.

From the

GVRP State

menu, select

Enable

or

Disable

.

This specifies the GARP VLAN registration protocol administrative mode for the port. If
you select

Disable

, the protocol is not active and the join time, leave time, and leave all

time options are without any effect. The default is Disable.

9.

In the

Join Timer

field, specify the time in centiseconds between the transmission of GARP

PDUs registering (or reregistering) membership for a VLAN or multicast group.

Enter a number between 10 and 100 (0.1 to 1.0 seconds). The default is 20 centiseconds
(0.2 seconds). An instance of this timer exists for each GARP participant for each port.

10.

In the

Leave Timer

field, specify the time in centiseconds to wait after receiving an

unregister request for a VLAN or multicast group before deleting the associated entry.

This allows time for another station to assert registration for the same attribute to
maintain uninterrupted service. Enter a number between 20 and 600 (0.2 to 6.0 seconds).
The default is 60 centiseconds (0.6 seconds). An instance of this timer exists for each
GARP participant for each port.

11.

In the

Leave All Timer field

,

specify how frequently (in centiseconds) LeaveAll PDUs are

generated.

A LeaveAll PDU indicates that all registrations will be deregistered soon. To maintain

registration, participants must rejoin. The leave all period timer is set to a random value in
the range of LeaveAllTime to 1.5 x LeaveAllTime. The timer is specified in centiseconds.
Enter a number between 200 and 6000 (2 to 60 seconds). The default is 1000