beautypg.com

NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual

Page 255

background image

Smart Managed Pro Switches MS510TX and MS510TXPP

Manage Device Security

User Manual

255

Configure a Private VLAN Host Interface on page

257

Configure a Private VLAN Promiscuous Interface on page

258

Configure the Private VLAN Type

To configure a private VLAN type:

1.

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.

2.

Launch a web browser.

3.

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see

Access the Switch on page

14

.

The login window opens.

4.

Enter the switch’s password in the

Password

field.

The default password is

password

.

The System Information page displays.

5.

Select

Security > Traffic Control > Private Vlan > Private Vlan Type Configuration

.

The Private Vlan Type Configuration page displays.

6.

Select the check box for the VLAN ID that you want to configure.

7.

From the

Private VLAN Type

menu, select the type of private VLAN. Possible values are as

follows:

Unconfigured

. Sets the private VLAN type as unconfigured. This is the default

selection.

Primary

. Sets the private VLAN type as primary, which allows Layer 2 connectivity

from promiscuous ports to isolated ports and to community ports.

Isolated

. Sets the private VLAN type as isolated, which allows isolated ports to send

traffic to the primary VLAN and to promiscuous ports.

Community

. Sets the private VLAN type as community, which allows Layer 2

connectivity from community ports to promiscuous ports and to community ports of
the same community.

8.

Click the

Apply

button.

Your settings are saved.

Configure Private VLAN Association Settings

To configure private VLAN association:

1.

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.