beautypg.com

View rapid stp information – NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual

Page 124

background image

Smart Managed Pro Switches MS510TX and MS510TXPP

Configure Switching

User Manual

124

The System Information page displays.

5.

Select

Switching > STP > Advanced > CST Port Status

.

The CST Port Status page displays.

6.

Select which type of interfaces display onscreen:

To display physical ports only, click the

PORTS

link.

To display LAGs only, click the

LAGS

link.

To display both physical ports and LAGs, click the

All

link.

7.

To refresh the page with the latest information about the switch, click the

Refresh

button.

The following table describes the CST Status information displayed on the page.

Table 29. CST port status

Field

Description

Interface

Identify the physical or port channel interfaces associated with VLANs
associated with the CST.

Port Role

Each MST bridge port that is enabled is assigned a port role for each spanning
tree. The port role is one of the following values: Root Port, Designated Port,

Alternate Port, Backup Port, Master Port, or Disabled Port.

Designated Root

Root bridge for the CST. It is made up using the bridge priority and the base
MAC address of the bridge.

Designated Cost

Path cost offered to the LAN by the designated port.

Designated Bridge

Bridge identifier of the bridge with the designated port. It is made up using the
bridge priority and the base MAC address of the bridge.

Designated Port

Port identifier on the designated bridge that offers the lowest cost to the LAN. It is
made up from the port priority and the interface number of the port.

Edge port

Indicates whether the port is enabled as an edge port. It is either Enabled or
Disabled.

Point-to-point MAC

Derived value of the point-to-point status.

CST Regional Root

Bridge identifier of the CST regional root. It is made up using the bridge priority
and the base MAC address of the bridge.

CST Path Cost

Path cost to the CST regional root.

Port Forwarding State

The forwarding state of the port.

View Rapid STP Information

Use the Rapid STP page to view information about Rapid Spanning Tree (RSTP) port status.

To view information about RSTP:

1.

Connect your computer to the same network as the switch.