NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 257
Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security
User Manual
257
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.
The System Information page displays.
5.
Select
Security > Traffic Control > Private Vlan > Private Vlan Port Mode
Configuration
.
The Private Vlan Port Mode Configuration page displays.
6.
Select one or more interfaces by taking one of the following actions:
•
To configure a single interface, select the check box associated with the interface, or
type the interface number in the
Go To Interface
field and click the
Go
button.
•
To configure multiple interfaces with the same settings, select the check box
associated with each interface.
•
To configure all interfaces with the same settings, select the check box in the heading
row.
7.
From the
Port VLAN Mode
menu, select the switch port mode:
•
General
. Sets the interface in general mode, which is the default selection. General
mode means that the interface is not a private VLAN port.
•
Private VLAN Promiscuous
. Sets the interface in promiscuous mode, which is used
for private VLAN promiscuous interface configurations. For more information, see
Configure a Private VLAN Promiscuous Interface on page
.
•
Private VLAN Host
. Sets the interface in host mode, which is used for private VLAN
host interface configurations. For more information, see
.
8.
Click the
Apply
button.
Your settings are saved.
Configure a Private VLAN Host Interface
To configure a private VLAN host interface:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.