beautypg.com

NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual

Page 230

background image

Smart Managed Pro Switches MS510TX and MS510TXPP

Manage Device Security

User Manual

230

4.

Enter the switch’s password in the

Password

field.

The default password is

password

.

The System Information page displays.

5.

Select

Security > Management Security > Authentication List > HTTP Authentication

List

.

The HTTP Authentication List page displays.

6.

Select the check box for the httpList name.

7.

From the menu in the 1 column, select the authentication method that must be used first in

the selected authentication login list.

If you select a method that does not time out as the first method, such as

Local

or

None

,

you cannot configure a second and third method. If you configure another method and
then select

Local

or

None

as the first method, no other method is tried. User

authentication occurs in the order that the methods are selected. Possible methods are
as follows:

Local

. The user’s locally stored ID and password are used for authentication. This is

the default method. Because the local method does not time out, if you select this
option as the first method, no other method is tried, even if you specified more than
one method.

RADIUS

. The user’s ID and password are authenticated using the RADIUS server. If

you select

Radius

or

Tacacs

as the first method and an error occurs during the

authentication, the switch uses method 2 to authenticate the user.

TACACS+

. The user’s ID and password are authenticated using the TACACS+

server. If you select

Radius

or

Tacacs

as the first method and an error occurs during

the authentication, the switch attempts user authentication method 2.

None

. The authentication method is unspecified. If you select this option as the first

method, no other method is tried, even if you specified more than one method.

8.

From the menu in the 2 column, select the authentication method, if any, that must be used

second in the selected authentication login list.

This is the method that is used if the first method times out. If you select a method that
does not time out as the second method, the third method is not tried.

9.

From the menu in the 3 column, select the authentication method, if any, that must be used

third in the selected authentication login list.

10.

From the menu in the 4 column, select the method, if any, that must be used fourth in the

selected authentication login list.

This is the method that is used if all previous methods time out.

11.

Click the

Apply

button.

Your settings are saved.