NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch - Manual (Page 229)

Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security User Manual 229
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 14 .
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password .
The System Information page displays.
5. Select Security > Management Security > TACACS+ > TACACS+ Server Configuration .
The TACACS+ Server Configuration page displays.
6. Select the check box for the server.
7. Click the Delete button.
The RADIUS accounting server is removed.
Configure Authentication Lists
Use the Authentication List page to configure the default login list. A login list specifies one or
more authentication methods to validate switch or port access for the admin user.
Note: The admin user is assigned to a preconfigured list that is named
defaultList and that you cannot delete.
From the Security > Management Security > Authentication List menu, you can access
the pages that are described in the following sections:
• Configure an HTTP Authentication List on page 229
• Configure an HTTPS Authentication List on page 231
Configure an HTTP Authentication List
Use the HTTP Authentication List page to configure the default HTTP login list.
To change the HTTP authentication method for the default list:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 14 .
The login window opens.