NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 270
Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security
User Manual
270
17.
From the
Logging
menu, select whether to enable or disable logging.
When set to
Enable
, logging is enabled for this ACL rule (subject to resource availability
on the switch). If the access list trap flag is also enabled, periodic traps are generated,
indicating the number of times the rule was evoked during the report interval. A trap is not
issued if the ACL rule hit count is zero for the interval. This field is supported only for a
deny action.
18.
Click the
Add
button.
The rule is added.
Change the Match Criteria for a MAC Rule
To change the match criteria for a MAC rule:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.
The System Information page displays.
5.
Select
Security > ACL > Basic > MAC Rules
.
The MAC Rules page displays.
6.
Select the check box for the rule.
7.
Modify the fields as needed.
8.
Click the
Apply
button.
Your settings are saved.
Delete a Rule for a MAC ACL
To delete a rule for a MAC:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.