Configure diffserv service interfaces – NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 214
Smart Managed Pro Switches MS510TX and MS510TXPP
Configure Quality of Service
User Manual
214
6.
Select the check box for the policy name.
7.
Click the
Delete
button.
The policy is removed.
Configure DiffServ Service Interfaces
You can assign a policy to one or more interfaces.
Attach a DiffServ Policy to an Interface
To attach a DiffServ policy to an interface:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.
The System Information page displays.
5.
Select
QoS > DiffServ > Advanced > Service Configuration
.
The Service Configuration page displays.
6.
Select which type of interfaces display onscreen:
•
To display physical ports only, click the
PORTS
link.
•
To display LAGs only, click the
LAGS
link.
•
To display both physical ports and LAGs, click the
All
link.
7.
Select one or more interfaces by taking one of the following actions:
•
To configure a single interface, select the check box associated with the interface, or
type the interface number in the
Go To Interface
field and click the
Go
button.
•
To configure multiple interfaces with the same settings, select the check box
associated with each interface.
•
To configure all interfaces with the same settings, select the check box in the heading
row.
8.
From the
Policy Name
menu, select a policy name.
9.
Click the
Apply
button.
Your settings are saved.