NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch - Manual (Page 146)

Smart Managed Pro Switches MS510TX and MS510TXPP
Configure Switching User Manual 146
Configure a Multicast Router Interface on a VLAN
When you connect an external multicast router to a switch interface that is a member of a
VLAN and you configure that switch interface as a multicast router interface, the external
multicast router is automatically added to the list of learned multicast routers.
This dynamic learning mode is applicable only to multicast router information (that is, to
queries from an attached true querier). In such a situation, you do not need to enable a
snooping dynamic learning mode (that is, the snooping interface mode or the snooping VLAN
mode) for the multicast router interface.
To configure a multicast router interface on a VLAN:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 14 .
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password .
The System Information page displays.
5. Select Switching  > Multicast > MLD Snooping > Multicast Router VLAN Configuration .
The Multicast Router VLAN Configuration page displays.
6. From the Interface menu, select the multicast router interface.
This is the interface to which an external multicast router is connected.
7. From the VLAN ID menu, select the VLAN ID of which the interface must be a member.
8. From the Multicast Router menu, select Enable to enable the multicast router mode for the
VLAN (and therefore, for the multicast router interface).
By default, Disable is selected.
9. Click the Apply button.
Your settings are saved.