NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch - Manual (Page 210)

Smart Managed Pro Switches MS510TX and MS510TXPP
Configure Quality of Service User Manual 210
The default password is password .
The System Information page displays.
5. Select QoS > DiffServ > Advanced > Policy Configuration .
The Policy Configuration page displays.
6. Enter a policy name in the Policy Name field.
You cannot specify the policy type. By default, the policy type is In, indicating that the
policy applies to ingress packets.
7. From the Member Class menu, optionally select an existing class that you want to
associate with the new policy.
8. Click the Add button.
The new policy is added.
9. After creating the policy, click the policy name.
The policy name is a hyperlink to the page on which you can define the policy attributes.
Note: The hyperlink is available only if the class associated with the policy
was configured using class-specific rules. If the class was configured
using an existing ACL, the hyperlink is not available because only the
ACL rules of permit or deny apply and policy attributes are not
applicable.