Configure access control lists – NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 259
Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security
User Manual
259
The default password is
password
.
The System Information page displays.
5.
Select
Security > Traffic Control > Private Vlan > Private Vlan Promiscuous Interface
Configuration
.
The Private Vlan Promiscuous Interface Configuration page displays.
6.
Select which type of interfaces display onscreen:
•
To display physical interfaces only, click
PORTS
.
•
To display LAGs only, click
LAGS
.
•
To display both physical interfaces and LAGs, click
All
.
7.
Select one or more interfaces by taking one of the following actions:
•
To configure a single interface, select the check box associated with the interface, or
type the interface number in the
Go To Interface
field and click the
Go
button.
•
To configure multiple interfaces with the same settings, select the check box
associated with each interface.
•
To configure all interfaces with the same settings, select the check box in the heading
row.
8.
In the
Promiscuous Primary VLAN
field, enter the primary VLAN ID for the promiscuous
association mode.
The range of the VLAN ID is 2–4093. You can enter only a VLAN that you previously
configured as a primary VLAN (see
Configure the Private VLAN Type on page
9.
In the
Promiscuous Secondary VLAN
field, enter the secondary VLAN ID for promiscuous
association mode.
This field can accept single a VLAN ID, a range of VLAN IDs, or a combination of both in
sequence separated by a comma. You can specify an individual VLAN ID, such as 10.
You can specify the VLAN range values separated by a hyphen, for example, 10-13. You
can specify the combination of both separated by commas, for example,
12,15,40-43,1000-1005, 2000. The range of VLAN IDs is 2–4093.
Note:
The VLAN ID list that you specify replaces the configured secondary
VLAN list in the association.
10.
Click the
Apply
button.
Your settings are saved.
The Operational VLAN(s) field displays the operational VLANs.
Configure Access Control Lists
Access control lists (ACLs) ensure that only authorized users can access specific resources
while blocking off any unwarranted attempts to reach network resources. ACLs are used to