NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 216
Smart Managed Pro Switches MS510TX and MS510TXPP
Configure Quality of Service
User Manual
216
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.
The System Information page displays.
5.
Select
QoS > DiffServ > Advanced > Service Statistics
.
The Service Statistics page displays.
6.
Click the
Refresh
button to refresh the page with the latest information about the switch.
The following table describes the information available on the Service Statistics page.
Table 54. DiffServ Service Statistics information
Field
Description
Interface
List of all valid slot number and port number combinations on the switch with a DiffServ
policy currently attached in the inbound direction.
Direction
List of the traffic direction of interface as In. Shows only the directions for which a DiffServ
policy is currently attached.
Policy Name
Name of the policy currently attached to the specified interface and direction.
Operational Status
Shows the operational status of this service interface, which is always Up.
Member Classes
All DiffServ classes currently defined as members of the selected policy name.