View the dual image status – NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 324
Smart Managed Pro Switches MS510TX and MS510TXPP
Maintain the Switch and Perform
Troubleshooting
User Manual
324
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.
The System Information page displays.
5.
Select
Maintenance > File Management > Dual Image Configuration
.
The Dual Image Configuration page displays.
6.
From the
Image Name
menu, select the image that is
not
the image displayed in the
Current-active field.
The Current-active field displays the name of the active image.
7.
To specify a name for the selected image, enter one in the
Image Description
field.
8.
Select the
Activate Image
check box.
9.
Click the
Apply
button.
Your settings are saved.
Note:
After activating an image, you must perform a system reboot of the
switch to run the new image. The switch continues running the image
shown in the Current-active field until the switch reboots.
10.
To refresh the page with the latest information about the switch, click the
Refresh
button.
View the Dual Image Status
The Dual Image Status page shows information about the active and backup images on the
system.
To view dual image status information:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.