Configure igmp snooping querier for vlans – NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 141
Smart Managed Pro Switches MS510TX and MS510TXPP
Configure Switching
User Manual
141
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.
The System Information page displays.
5.
Select
Switching
> Multicast > IGMP Snooping Querier > Querier Configuration
.
The Querier Configuration page displays. The page also shows the VLAN IDs Enabled
for IGMP Snooping Querier section.
6.
Next to Querier Admin Mode, select whether the IGMP snooping querier is enabled on the
switch:
•
Enable
. The switch queries devices on the network for IGMP reports.
•
Disable
. The switch does not query devices on the network for IGMP reports. This is
the default setting.
7.
Configure the following settings:
•
Snooping Querier Address
. Enter the snooping querier IP address to be used as
the source address in periodic IGMP queries. This address is used when no address
is configured on the VLAN on which a query is being sent.
•
Query Interval (secs)
. Specify the interval in seconds between periodic queries sent
by the snooping querier. The query interval must be a value in the range of 30–1800.
The default value is 125.
8.
Click the
Apply
button.
Your settings are saved.
The following table displays nonconfigurable information about the IGMP snooping querier.
Configure IGMP Snooping Querier for VLANs
You can configure IGMP queriers for use with VLANs on the network.
To create a new VLAN ID for IGMP snooping:
1.
Connect your computer to the same network as the switch.
Table 39. IGMP snooping querier information
Field
Description
IGMP Version
The IGMP protocol version used in periodic IGMP queries.
Only ICMPv2 is supported.
Querier Expiry Interval
The interval in seconds after which the last querier information is removed. This
value is calculated as follows: 2 * Query Interval + 5, so by default the value is
2*125+5 = 255.
VLAN IDs Enabled For IGMP
Snooping Querier
The VLANs on which the IGMP snooping querier is enabled. For more
information, see