Configure mst port settings – NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 128
Smart Managed Pro Switches MS510TX and MS510TXPP
Configure Switching
User Manual
128
Your settings are saved.
Delete an MST Instance
To delete an MST instance:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.
The System Information page displays.
5.
Select
Switching > STP > Advanced > MST Configuration
.
The MST Configuration page displays.
6.
Select the check box for the instance.
7.
Click the
Delete
button.
The MST instance is removed.
Configure MST Port Settings
Use the MST Port Configuration page to configure and display Multiple Spanning Tree (MST)
settings on a specific port on the switch.
To configure MST port settings and start the STP migration process for an MST
instance:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.