NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch - Manual (Page 261)

Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security User Manual 261
Use the ACL Wizard to create an ACL
To use the ACL Wizard to create an ACL:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 14 .
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password .
The System Information page displays.
5. Select Security > ACL > ACL Wizard .
6. From the ACL Type menu, select the type of ACL.
You can select from the following ACL types:
• ACL Based on Destination MAC . Creates an ACL based on the destination MAC
address, destination MAC mask, and VLAN.
• ACL Based on Source MAC . Creates an ACL based on the source MAC address,
source MAC mask, and VLAN.
• ACL Based on Destination IPv4 . Creates an ACL based on the destination IPv4
address and IPv4 address mask.