Configure mac acl rules – NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 267
Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security
User Manual
267
The default password is
password
.
The System Information page displays.
5.
Select
Security > ACL > Basic > MAC ACL
.
The MAC ACL page displays.
6.
Select check box for the rule.
7.
In the
Name
field, specify the new name.
8.
Click the
Apply
button.
Your settings are saved.
Delete a MAC ACL
To delete a MAC ACL:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.
The System Information page displays.
5.
Select
Security > ACL > Basic > MAC ACL
.
The MAC ACL page displays.
6.
Select check box for the rule.
7.
Click the
Delete
button.
The rule is removed.
Configure MAC ACL Rules
Use the MAC Rules page to define rules for MAC-based ACLs. The access list definition
includes rules that specify whether traffic matching the criteria is forwarded normally or
discarded. A default
deny all
rule is the last rule of every list.