Configure the multicast forward all option – NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 152
Smart Managed Pro Switches MS510TX and MS510TXPP
Configure Switching
User Manual
152
•
To configure a single interface, select the check box associated with the interface, or
type the interface number in the
Go To Interface
field and click the
Go
button.
•
To configure multiple interfaces with the same settings, select the check box
associated with each interface.
•
To configure all interfaces with the same settings, select the check box in the heading
row.
10.
From the
Interface Status
menu, select one of the following options:
•
Static
. The interface becomes a static member of the multicast group on the selected
VLAN.
•
Forbidden
. The interface is forbidden from joining the multicast group on the selected
VLAN.
•
Excluded
. The interface is not a static member of the multicast group but could
become a dynamic member of a multicast group on the selected VLAN. This is the
default state.
Note:
If an interface was added dynamically to the multicast group as a result
of IGMP or MLD snooping, the status of the interface is Dynamic. You
cannot select this status manually.
11.
Click the
Apply
button.
Your settings are saved.
Configure the Multicast Forward All Option
After IGMP snooping is enabled, multicast packets are forwarded only to the members of
multicast groups. However, you can enable the Multicast Forward All option for an interface
so that the interface receives and forwards all multicast traffic on the VLAN.
To enable the Multicast Forward All option for an interface:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.
The System Information page displays.
5.
Select
Switching > Multicast > Static Multicast Address > Multicast Forward All
.