Configure ipv6 rules – NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 284
Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security
User Manual
284
The IPv6 ACL is added.
The following table describes the nonconfigurable information displayed on the page.
Table 63. IPv6 ACL Table information
Field
Description
Rules
The number of the rules that are associated with the IP ACL.
Type
The type is IPv6 ACL.
Delete an IPv6 ACL
To delete an IPv6 ACL:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
Password
field.
The default password is
password
.
The System Information page displays.
5.
Select
Security > ACL > Advanced > IPv6 ACL
.
The IPv6 ACL Table page displays.
6.
Select the check box for the IPv6 ACL.
7.
Click the
Delete
button.
The IPv6 ACL is removed.
Configure IPv6 Rules
Use these pages to display the rules for the IPv6 access control lists, which are created using
the IPv6 Access Control List Configuration page. By default, no specific value is in effect for
any of the IPv6 ACL rules.
Add a Rule for an IPv6 ACL
Add a rule for an ACL IPv6:
1.
Connect your computer to the same network as the switch.