NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch - Manual (Page 290)

Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security User Manual 290
The following table describes the nonconfigurable information displayed on the page.
View or Delete IP ACL Bindings in the IP ACL Binding Table
Use the IP Binding Table page to view or delete the IP ACL bindings.
To view or delete IP ACL bindings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 14 .
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password .
The System Information page displays.
5. Select Security > ACL > Advanced > Binding Table .
The IP Binding Table page displays.
6. To delete an IP ACL-to-interface binding, do the following:
a. Select the check box for the interface.
b. Click the Delete button.
The binding is removed.
Table 64. Interface Binding Status table information
Field Description
Interface The selected interface.
Direction The selected packet filtering direction for the ACL.
ACL Type The type of ACL assigned to the selected interface and direction.
ACL ID The ACL number (for an IP ACL) or ACL name (for a named IPv6 ACL) identifying the
ACL assigned to the selected interface and direction.
Sequence Number The sequence number signifying the order of specified ACL relative to other ACLs
assigned to the selected interface and direction.