Metrohm viva 1.0 Manual - Manual (Page 866)

9.1 How to proceed?
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
854 ￭￭￭￭￭￭￭￭
viva 1.0
7 Select the line to be modified in the Run subwindow.
8 Click on the [Edit] ▶ Edit line menu item.
The Edit line 'Name' dialog window opens.
9 Select the desired method in the Method selection list and enter the
sample data.
10 Click on [Apply].
The sample data entered is applied to the respective line in the work-
ing sample table.
11 Repeat step 8 for each required determination.
12 Click on [Close].
The Edit line 'Name' dialog window closes.
13 If desired, click on the [Sample table] ▶ Save as... menu item in
the Run subwindow.
The Save sample table dialog window opens.
14 Enter a name in the Name field.
15 Click on [Save].
The working sample table is saved as sample table under the name
that has been entered.
9.1.8 Reports
9.1.8.1 Creating a report template
How to proceed?
1 Select the Database program part.
2
NOTE
A database must be open in order to carry out the subsequent
steps.