Metrohm viva 1.0 Manual - Manual (Page 664)

6.3 Configuration data
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
652 ￭￭￭￭￭￭￭￭
viva 1.0
The [Edit] menu below the list of templates or a right-click on the table
opens a menu with the following menu items:
New... Create a new template (see Chapter 6.3.3.2.2, page 652).
Properties... Edit the selected template (see Chapter 6.3.3.2.2, page 652).
Delete Deletes the selected template.
6.3.3.2.2 Editing templates for output lines
Dialog window: Configuration ▶ Tools ▶ Templates ▶ Output lines... ▶ Templates
for output lines ▶ New... / Properties... ▶ New template / Edit template
Signal name
Name of the template for the output signal.
Entry 25 characters
Output signal
Entry of the bit pattern for the output signal with exactly 14 characters.
It is possible to enter the characters
0 = Line inactive,
1 = Line active,
* = Any line status and
p = Set pulse
Selection Bit pattern with exactly 14 characters (0, 1, *,
p) | **************
Default value **************
The output lines and bits are numbered from right to left:
Output 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Bit 13 12 11 10 9 8 7 6 5 4 3 2 1 0
NOTE
We recommend masking the irrelevant output lines with an asterisk *
so as not to modify these line conditions.
Pulse length
Duration of the transmitted pulse.
Input range 1 - 999 s
Default value 1 s