Metrohm viva 1.0 Manual - Manual (Page 697)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
viva 1.0
￭￭￭￭￭￭￭￭ 685
6.7.2.5 Printing the sensor list
Dialog window: Configuration ▶ Sensors/Electrodes ▶ [Edit] ▶ Print (PDF)... ▶ Print
list of sensors (PDF)
The Print list of sensors (PDF) dialog window is opened with
[Edit]
▶ Print (PDF)....
Orientation
Selection of the printing orientation.
Selection Portrait | Landscape
Default value Portrait
Portrait
Output of the sensor table in portrait format.
Landscape
Output of the sensor table in landscape format.
[OK]
The sensor table is output in the required format as a PDF file and opened
directly with Acrobat Reader; it can then be printed out and/or saved.
6.7.3 Sensor properties
6.7.3.1 Editing the sensor properties
Dialog window: Configuration ▶ Sensors/Electrodes ▶ [Edit] ▶ Properties... ▶ Sen-
sor
The properties window for the sensor selected in the sensor table, in
which the parameters of the sensor can be edited, is opened with the
[Edit]
▶ Properties... menu item in the Sensors/Electrodes sub-
window . It consists of the following tab:
￭ Sensor
General information about the sensor, such as sensor name, sensor
type, set to work, etc.
6.7.3.2 Properties - Sensor
Tab: Configuration ▶ Sensors/Electrodes ▶ [Edit] ▶ Properties... ▶ Sensor
Sensor name
Name of the sensor.
Entry 24 characters