Metrohm viva 1.0 Manual - Manual (Page 299)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
viva 1.0
￭￭￭￭￭￭￭￭ 287
End value
End value for scaling the x axis.
Editable only when autoscaling is deactivated.
Input range
-1.00E+12 - +1.00E+12
Default value +1.00E+12
Curve properties MEAS - y1 axis
Tab: Workplace / Database ▶ Curves # ▶ Properties Curves # ▶ y1 Axis
Parameters for the graphical display of the curves on the y1 axis (left-hand
y axis).
Quantity
Selection of the quantity to be shown on the y1 axis.
For MEAS Ref
Selection
Wavelength [nm] | Intensity [Counts] | Inten-
sity Dark [Counts] | Transmission [%] | Satura-
ted pixels
Default value Intensity [Counts]
For MEAS Spec
Selection
Wavelength [nm] | Absorbance [mAU] | Inten-
sity [Counts] | Intensity Dark [Counts] | Inten-
sity Ref [Counts] | Transmission [%] | Satura-
ted pixels
Default value Absorbance [mAU]
For MEAS Opt
Selection
Time [s] | Measured value | Intensity [Counts] |
Transmission [%] | Saturated pixels | Temper-
ature [°C] | d
ε/dt [mAU/min] | Calculated 1 - 3 |
External 1 - 3
Default value Measured value
For CAL Spec
Selection
Wavelength [nm] | Intensity [Counts] | Satura-
ted pixels
Default value Intensity [Counts]
For MEAS TMF
Selection
Time [s] | Measured value [mAU] | Transmis-
sion [%] | Temperature [°C] | d
ε/dt [mAU/min]
Default value Measured value [mAU]