Metrohm viva 1.0 Manual - Manual (Page 563)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0
￭￭￭￭￭￭￭￭ 551
[E-mail...]
Opens the Send e-mail dialog window for defining the e-mail parameters
(see Chapter 2.5.1, page 69).
Acoustic signal
on | off (Default value: off)
If this check box is activated, an acoustic signal will be emitted in addition
to the message.
5.5.2.10.5 SEQUENCE
5.5.2.10.5.1 SEQUENCE - Overview
Dialog window: Method ▶ SEQUENCE ▶ Properties... ▶ SEQUENCE - 'Command
name'
Command for combining a sequence of individual commands into a single
command. This command is used only for the more readily comprehensi-
ble structuring of methods.
Appearance
The command has the following appearance:
Parameters
The parameters for the SEQUENCE command are configured in the fol-
lowing dialog window:
￭ SEQUENCE
Command variables
The following command variables are generated by the SEQUENCE com-
mand in the method run and can be used in formulas under the designa-
tion 'Command name.Variable identification':
Identification Description
BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command
has never been started
FIN Command status; 1 = Command has ended at
least once, 0, invalid (variable not available) =
Command has never ended