Metrohm viva 1.0 Manual - Manual (Page 823)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
8 Manual control
viva 1.0
￭￭￭￭￭￭￭￭ 811
Swing position
If this option is selected, the current lift position is assigned to the swing
position of the robotic arm.
Selection External positions
Default value External positions
[Assign]
Triggers assignment. During the assignment the cursor is displayed as
hourglass.
Robotic arm position
Assign the current rack position to a specific external robotic arm position.
Current position
Shows the current position of the robotic arm in °.
External position
Selection of the external position to which the current robotic arm posi-
tion is to be assigned.
Input range 1 - 4
Default value 1
[Assign]
Triggers assignment. During the assignment the cursor is displayed as
hourglass.
8.4.5.5 Sample changer - Pumping
Program part: Manual control
The pumps connected to the tower can be switched on and off here.
Pump 1
Manually control pump 1 or valve 1 on the selected tower.
Operation
Selection whether the pump or valve is to be switched on or off manually
or whether it is to be switched on for a specified duration and then
switched off again automatically.
Selection On/Off | Duration
Default value On/Off
Duration
Entry of the duration during which the pump/valve should remain
switched on. This field is only displayed for Operation = Duration.