Metrohm viva 1.0 Manual - Manual (Page 108)

3.3 Sample tables
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
96 ￭￭￭￭￭￭￭￭
viva 1.0
ID4 - ID16
on | off (Default value: off)
If this check box is activated, then this field will automatically be filled with
the content of the previous line when a new sample data line is created.
Sample type
This field will automatically be filled with the content of the previous line
when a new sample data line is generated.
Sample position + 1
on | off (Default value: on)
If this check box is activated, then the content of this field will automati-
cally be incremented by +1 when a new sample data line is created.
Sample amount
on | off (Default value: on)
If this check box is activated, then this field will automatically be filled with
the content of the previous line when a new sample data line is created.
Sample amount unit
on | off (Default value: on)
If this check box is activated, then this field will automatically be filled with
the content of the previous line when a new sample data line is created.
Analytical volume
on | off (Default value: off)
If this check box is activated, then this field will automatically be filled with
the content of the previous line when a new sample data line is created.
Dilution volume
on | off (Default value: off)
If this check box is activated, then this field will automatically be filled with
the content of the previous line when a new sample data line is created.
3.3.2.4 Properties - Process
Tab: Workplace ▶ Tools ▶ Sample table ▶ Open... ▶ Open sample
table ▶ [Open] ▶ Sample table 'Name' ▶ [Sample table] ▶ Properties... ▶ Proper-
ties - Sample table 'Name' ▶ Process
Dialog window: Workplace ▶ View ▶ Properties ▶ ▶ Properties Run win-
dow ▶ Properties - Determination series ▶ Process
Dialog window: Workplace ▶ Run ▶ Determination series ▶ [Sample table] ▶ Prop-
erties... ▶ Properties - Determination series ▶ Process