Metrohm viva 1.0 Manual - Manual (Page 533)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0
￭￭￭￭￭￭￭￭ 521
Device
Device name
Selection of a device from those available in the device table. Only devices
with which the command can be executed are available.
Selection 'Device name' | not defined
Default value not defined
not defined
In this case, the device name must be assigned by the user at the start
of the method.
Device type
Display or selection of the instrument type. If an instrument is selected in
the Device name field, the Instrument type field can no longer be
edited and the instrument type belonging to the instrument is displayed.
If the not defined option is selected in the Device name field, all instru-
ment types or groups with which the command can be executed can be
selected, regardless of the instruments present in the device table.
Selection 814 USB Sample Processor | 815 Robotic USB
Sample Processor XL | 858.0010 Professional
Sample Processor | 858.0020 Professional
Sample Processor | 858.0030 Professional
Sample Processor | 919.0020 IC Autosampler
plus
Default value 858.0020 Professional Sample Processor
5.5.2.9 Communication commands
5.5.2.9.1 Communication commands - Overview
Menu item: Method ▶ Insert ▶ New command... ▶ Communication
Commands for communications within the program or with external
instruments.
The following communication commands can be selected:
￭ CTRL
Setting of remote output lines.
￭ SCAN
Scanning remote input lines.
￭ SEND
Sending event messages.
￭ RECEIVE
Waiting for event messages or status messages.
￭ TRANSFER
Data transfer via RS-232 to external instruments.