Metrohm viva 1.0 Manual - Manual (Page 865)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
9 Support
viva 1.0
￭￭￭￭￭￭￭￭ 853
14 Enter a new name for the sample table or overwrite the existing
name in the Name field.
15 Click on [Save].
The edited sample table is saved.
9.1.7.3 Loading a working sample table
How to proceed?
1 Select the Workplace program part.
2 Click on the Determination series tab in the Run subwindow.
3 Click on the [Sample table] ▶ Load... menu item.
The Load sample table dialog window opens.
4 Select the desired sample table.
5 Click on [Load].
The data of the selected sample table is loaded into the working
sample table.
9.1.7.4 Editing a working sample table
How to proceed?
1 Select the Workplace program part.
2 Click on the Determination series tab in the Run subwindow.
3 If desired, load the existing sample table into the working sample
table.
4 If desired, click on the [Sample table] ▶ Properties... menu item in
the Run subwindow.
The Properties - Determination series dialog window opens.
5 Define the properties for the determination series.
6 Click on [OK].
The Properties - Determination series dialog window closes.