Metrohm viva 1.0 Manual - Manual (Page 737)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
viva 1.0
￭￭￭￭￭￭￭￭ 725
The following columns are displayed in the table:
Special beaker
Number of the special beaker for the selected rack.
Rack position
Number of the rack position for the special beaker.
Work position Tower 1
Work position for the special beaker at tower 1.
Work position Tower 2
Work position for the special beaker at tower 2.
Beaker radius
Radius of the special beaker.
Beaker sensor
Defines whether a beaker sensor is to be used for the special beaker, and
if so, which.
[Edit]
Opens the Special beaker # (see Chapter 6.11.3.5, page 725) dialog
window for editing the data of the selected special beaker.
6.11.3.5 Special beaker
Dialog window: Configuration ▶ Rack data ▶ [Edit] ▶ Properties... ▶ Rack
data ▶ Special beakers ▶ [Edit] ▶ Special beaker #
The parameters for the special beaker selected in the table of special beak-
ers can be defined in the Special beaker # dialog window.
Rack position
Number of the rack position for the selected special beaker.
Input range 0 - n (n is rack-dependent)
NOTE
Special beakers should preferably be set at high rack positions in order
to be able to begin sample series at rack position 1. Rack positions
defined as special beakers are no longer available as sample positions.
They will be skipped during an automatic movement to a sample posi-
tion.