Metrohm viva 1.0 Manual - Manual (Page 435)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0
￭￭￭￭￭￭￭￭ 423
5.5.2.5 Measuring commands
5.5.2.5.1 Measuring commands - Overview
Menu item: Method ▶ Insert ▶ New command... ▶ Measure
The following measuring commands can be selected:
￭ MEAS Ref
Measurement of a reference solution with the spectrometer.
￭ MEAS Spec
Measurement of the sample solution.
￭ MEAS Opt
Absorbance measurement.
￭ MEAS Opt Conc
Measurement of standard solutions for the calibration of color
reagents.
￭ MEAS TMF
Measurement of a reference solution with the photometer.
5.5.2.5.2 MEAS Ref
5.5.2.5.2.1 MEAS Ref - Overview
Dialog window: Method ▶ MEAS Ref ▶ Properties... ▶ MEAS Ref - 'Command
name'
Command for the Measurement of a reference spectrum.
Instruments
This command can be executed with the following instrument:
Spectrometer: Avantes
Appearance
The command has the following appearance:
Parameters
The parameters for the MEAS Ref command are set on the following
tabs:
￭ General/Hardware
Parameters for instrument.
￭ Measuring parameters
Parameters for setting the measurement procedure.