Metrohm viva 1.0 Manual - Manual (Page 43)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 General program functions
viva 1.0
￭￭￭￭￭￭￭￭ 31
Available determination variables
Designation Description Data type
DUR Duration of the determination in s Number
STT Moment at which the determination has been started Date/Time
2.3.3.8 System variables
Dialog window: Formula editor ▶ Variables
System variables are general variables which are adopted in the determi-
nation at the start of the determination. They are assigned neither to indi-
vidual commands nor to determinations. The Determination variables
field of the formula editor lists all the System variables that are available
for the current method.
Syntax
'SV.Variable identification'
Examples: 'SV.SIN', 'SV.SLI'
System variables can be selected directly in the formula editor under Vari-
ables
▶ System variables so as to avoid syntax errors.
Available system variables
Designation Description Data type
ACC Autostart actual counter Number
ACE Autostart setpoint counter Number
DID Determination ID Text
FUN Full name of the logged-in user Text
ORG Method run: 1 = original determination, 0 = reprocessing Number
REM Remarks Text
RUN Sample number Number
SEN Indication whether the end of the sample table has been reached; 1 = yes, 0 =
no Number
SIN Indication whether the determination has been started as a single determination
or within a series; 1 = single determination, 0 = series determination Number
SLI Sample table actual line (number) Number
STC Start counter Number
STO Indication whether the determination has been stopped (manual stop, stop via
SEND command, emergency stop) or terminated normally; 1 = stopped, 0 =
terminated normally Number
USN Short name of the logged-in user Text