Metrohm viva 1.0 Manual - Manual (Page 176)

3.9 Curves subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
164 ￭￭￭￭￭￭￭￭
viva 1.0
Manual scaling
on | off (Default value: off)
If this check box is activated, then the y1 axis can be manually scaled in
the curve window. In this case, the Start value and End value fields can
be edited. If this check box is not activated, then the y1 axis will be auto-
matically scaled.
Start value
Initial value for scaling the y1 axis.
Editable only when autoscaling is deactivated.
Input range
-1.00E+12 - +1.00E+12
Default value -1.00E+12
End value
End value for scaling the y1 axis.
Editable only when autoscaling is deactivated.
Input range
-1.00E+12 - +1.00E+12
Default value +1.00E+12
Curve
Axis label
Selection of the color for the designation of the y1 axis.
Selection 13 colors | black
Default value black
Symbol
Selection of the symbol for the display of the individual measuring points.
Selection ● | ╳ | ✸ | ￭ | ▲ | no symbol
Default value no symbol
no symbol
Measuring points are not shown.
Show original curve
on | off (Default value: off)
If this check box is activated, then the original curve will be displayed
instead of the smoothed curve.