Metrohm viva 1.0 Manual - Manual (Page 418)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
406 ￭￭￭￭￭￭￭￭
viva 1.0
Selection off
Default value off
Waiting time 2
Waiting time during which the Potential 2 potential is applied to the
electrodes.
Only editable for Potential 2 ≠ off, otherwise inactive.
Input range 0.0 - 9,999.9 s (Increment: 0.1)
Default value 0.0 s
Potential 3
Potential that is applied to the electrodes during the Waiting time 3.
Input range -5.000 - 5.000 V (Increment: 0.001)
Selection off
Default value off
Waiting time 3
Waiting time during which the Potential 3 potential is applied to the
electrodes.
Only editable for Potential 3 ≠ off, otherwise inactive.
Input range 0.0 - 9,999.9 s (Increment: 0.1)
Default value 0.0 s
Equilibration time
Waiting time before the sweep during which the Start potential is
applied to the electrodes.
Input range 0.0 - 9,999.9 s (Increment: 0.1)
Default value 5.0 s
5.5.2.3.2.4 CVS - Sweep
Tab: Method ▶ CVS ▶ Properties... ▶ Sweep
Command name
Name of the command.
Entry 25 characters
Start potential
Start potential for the sweep.
Input range -5.000 - 5.000 V (Increment: 0.001)
Default value 1.625 V