Metrohm viva 1.0 Manual - Manual (Page 416)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
404 ￭￭￭￭￭￭￭￭
viva 1.0
RDE
Standard electrode of the RDE type, which cannot be deleted.
'Electrode name'
Electrode of the RDE type from the electrode table.
Sensor type
Shows the type of working electrode (RDE).
Reference electrode
Selection of an electrode of the Reference electrode type from the elec-
trodes available in the electrode table.
Selection Reference electrode | 'Electrode name'
Default value Reference electrode
Reference electrode
Standard electrode of the Reference electrode type, which cannot
be deleted.
'Electrode name'
Electrode of the Reference electrode type from the electrode table.
Auxiliary electrode
Selection of an electrode of the Auxiliary electrode type from the elec-
trodes available in the electrode table.
Selection Auxiliary electrode | 'Electrode name'
Default value Auxiliary electrode
Auxiliary electrode
Standard electrode of the Auxiliary electrode type, which cannot be
deleted.
'Electrode name'
Electrode of the Auxiliary electrode type from the electrode table.
Electrode test
The electrode test for the reference and auxiliary electrodes can be activa-
ted and deactivated only in the START command (see "Electrode test for
VA measuring commands", page 384).
Stirrer
Stirring rate
Number of revolutions per minute of the stirrer.
Input range 0 - 3,000 min ⁻¹ (Increment: 100)
Default value 2,500 min ⁻¹