Metrohm viva 1.0 Manual - Manual (Page 160)

3.7 Method subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
148 ￭￭￭￭￭￭￭￭
viva 1.0
NOTE
If an active SEQUENCE command is canceled, then only the single
command that is currently active in the sequence is canceled and the
next single command is started.
Live modifications
The properties window of the respective command, in which all parame-
ters are listed but in which you can only edit the specified live parameters,
is opened by double-clicking on a command or with the context-sensitive
Properties... menu item. This parameter window additionally contains
the [Apply] button, which is used to apply the modified live parameters,
including while the parameter window is open. Live parameters can be
modified both in the status BUSY and READY.
The modified parameters are valid until the method is changed, the user
logs out or the program is closed. In these cases, a prompt asking
whether to save the method anew appears. A new method version is cre-
ated if you click on [Yes] and the old method version is maintained if you
click on [No].
If live parameters are modified, then these modifications are documented
in the determination. In the determination's parameter report, all parame-
ters that have been modified are highlighted with an asterisk (*) and saved
at the end of the determination. If parameters of already processed com-
mands are modified, then these modifications only become effective for
the following determination, but they are nevertheless highlighted as
"modified live" in the method report of the completed determination. The
markings will disappear as soon as the method is saved in the regular way.
Methods with modified live parameters can also be manually saved anew
in the status READY at any time with File
▶ Method ▶ Save or
File ▶ Method ▶ Save as....
NOTE
Fields whose content is defined by a formula cannot be modified live.
3.7.3 Method window - Evaluation
Tab: Workplace ▶ Method ▶ Evaluation
Representation of the evaluation parameters
The evaluation parameters for the loaded method are displayed on the
Evaluation tab in the Method subwindow. They are represented in the
same way as in the Method program part.