Metrohm viva 1.0 Manual - Manual (Page 415)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0
￭￭￭￭￭￭￭￭ 403
Identification Description
HGT.ASD Absolute standard deviation of the peak heights of
all replications
HGT.RSD Relative standard deviation of the peak heights of all
replications
5.5.2.3.2.2 CVS - General/Hardware
Tab: Method ▶ CVS ▶ Properties... ▶ General/Hardware
Command name
Name of the command.
Entry 25 characters
Device
Device name
Selection of a device from those available in the device table. Only devices
with which the command can be executed are available.
Selection 'Device name' | not defined
Default value not defined
not defined
In this case, the device name must be assigned by the user at the start
of the method.
Device type
Display or selection of the device type. If a device is selected in the Device
name field, the Device type field can no longer be edited and the device
type belonging to the device is displayed.
If the not defined option is selected in the Device name field, all device
types or groups with which the command can be executed are displayed
regardless of the devices present in the device table.
Selection 894 Professional CVS
Default value 894 Professional CVS
Sensors/Electrodes
Working electrode
Selection of an electrode of the Working electrode type from the elec-
trodes of the RDE type present in the electrode table.
Selection RDE | 'Electrode name'
Default value RDE